5.6 Transmitting DSC Calls

5.6.1 Transmitting Individual call

The Individual call function allows you to transmit a DSC sig- nal to a specific ship only.

qPush [DSC/ENT] to enter the DSC menu.

wRotate [CHANNEL] to select “Individual,” push [DSC/ENT].

Sel Item POS Input

˘Individual Group

eRotate [CHANNEL] to select the desired pre-programmed

individual address or “Manual Input,” push

[DSC/ENT].

The ID code for the Individual call can be set in advance. (p. 13)

When “Manual Input” is selected, set the 9-digit ID code (1st digit must not be ‘0’) for the individual you wish to call by using [CHANNEL].

-Push [CH/WX] or [SCAN] for cursor movement.

-After 9-digit is input, push [DSC/ENT] to set the ID code.

Sel Address Manual Set Ricky

˘Tom

5.DSC Operation

rRotate [CHANNEL] to select a desired intership channel or “Manual Input,” push [DSC/ENT].

•When “Manual Input” is selected, rotate [CHANNEL] to se- lect the desired channel other than Channel 70, push [DSC/ENT].

Sel Channel ˘08

69

77

tPush [DSC/ENT] to transmit the Individual call.

If Channel 70 is busy, the transceiver stands by until the channel becomes clear.

To Call, [DSC/ENT] To Cancel [other]

Push [DSC/ENT] to transmit DSC call.

Individual Ch70 is BUSY To Cancel [other]

When Ch 70 is busy.

20

Page 29
Image 29
Furuno FM-3000 manual Transmitting DSC Calls, Transmitting Individual call, Push DSC/ENT to transmit the Individual call