Furuno FM-3000 manual Call Channel Programming, Channel Comments, Push

2.3 Call Channel Programming

Call channel is used to select Channel 9 (default), however, you can program the call channel with your most often-used channels in each channel group for quick recall.

qWhile pushing [HI/LO], push [CH/WX] ( DW U/I/C ) one or more times to select the desired channel group (U.S.A., In- ternational, Canada) to be programmed.

wPush [16] ( 9 ) for 1 sec. to select call channel of the se- lected channel group.

•“CALL” and call channel number appear.

•The order of indication precedence is “SP OFF,” “LOCAL” and

2.Basic Operation

2.4 Channel Comments

Memory channels can be tagged with alphanumeric com- ments of up to 10 characters each.

Capital letters, small letters, numerals, some symbols (! " #

$% & ' ( ) * + , - ./ =) and space can be used.

qSelect the desired channel.

• Cancel dualwatch, Tri-watch or scan in advance.

wWhile pushing [HI/LO], push [16] ( 9 ) to edit the channel comment.

• A cursor appears and blinks.

“CALL.”

ePush [16] ( 9 ) again for 3 sec. (until a long beep changes to 2 short beeps) to enter call channel pro- gramming condition.

• Channel number starts blinking.

INT

25W CALL TAG CALLING

INT

25W TAG

äLEASURE

eSelect the desired character by rotating [CHANNEL] or by pushing [Y]/[Z] on the microphone.

r Rotate [CHANNEL] to se-				INT
lect the desired channel.
			25W	CALL
t Push [16] (		) to program	TAG	DUP
	9
			INTL
the displayed channel as
call channel.

•Push [CH/WX] ( DW U/I/C ) to cancel.

•The channel number stops blinking.

•Push [CH/WX] or [SCAN] to move the cursor forward or back- ward, respectively.

rPush [16] ( 9 ) to input and set the comment.

•Push [HI/LO] to cancel.

•The cursor disappears.

tRepeat steps q to r to program the other channels, if de- sired.

8