Using the optional FM-3040 | Furuno FM-3000 specs

8.5.2 Using the optional FM-3040

An optional FM-3040 FLUSH MOUNT is available for mounting the transceiver to a ﬂat surface such as an instrument panel.

RCAUTION

KEEP the transceiver and microphone at least 1 meter away from your vessel’s magnetic navigation compass.

qUsing the template on the last page, carefully cut a hole into the instrument panel (or wherever you plan to mount the transceiver).

wSlide the transceiver through the hole as shown below.

eAttach the 2 supplied bolts (M5 ⋅ 8 mm) on either side of the FM-3000.

8.Connections and Maintenance

rAttach the clamps on either side of the FM-3000.

• Make sure that the clamps align parallel to the FM-3000’s body.

tTighten the end bolts on the clamps (rotate clockwise) so that the clamps press firmly against the inside of the in-

strument control panel.

yTighten the locking nuts (rotate counterclockwise) so that

the FM-3000 is securely mounted in position as below.

uConnect the antenna and power cable, then return the in- strument control panel to its original place.

44

Image 53

Furuno manual Using the optional FM-3040, Attach the clamps on either side of the FM-3000

Contents

Marine VHF Radiotelephone FM-3000 Foreword Case of Emergency Any repair work must be done by a licensed radio technician Do not open the equipmentDo not disassemble or modify the equipment Standard Steerling Only qualified personal should work in- side the equipmentCompass Transceiver Table of Contents Set Mode Programming Setting Tag ChannelsInstallation Panel Description Vii System Conﬁgulation Options Standard supply & OptionsStandard supply Front Panel ControlsSQL control p HI/LO key 16 9 key LO/DX IC SCR keyDistress key CH/WX DW U/I/C key Function Display Microphone Channel Selection Basic OperationChannel Channel 9 Call channel Weather channels Push once When Weather alert is OFF A. channels Or twiceChange the channel group, if necessary Rotate Channel to select a channel Receiving and Transmitting Push HI/LO to select the output power, if necessary Push Call Channel ProgrammingChannel Comments Optional Voice Scrambler Operation Set mode Scrambler code itemActivating the Scrambler Programming scrambler codes Description Dualwatch/Tri-WatchOperation Again Example Operating Tri-watch on INT Channel Scan Types Scan Operation Convinient Clearing setting all tagged channels Setting Tag ChannelsStarting a Scan Scan starts Mmsi Code Programming DSC OperationDSC Individual ID Programming Address ID/Group ID Rotate Channel to select the desired ID name for deleting Deleting Address ID/Group IDSet the individual ID and ID name Edit the digit of your longitude data by using Channel Edit the digit of your latitude data by using ChannelEdit the digit of the current UTC time by using CHAN- NEL Push DSC/ENT to set the time, and exit the DSC menu Sentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’ Position/Time Indication Simple call Distress alert contains defaultDistress Call Normal call Push Distress for 5 sec. to transmit the Distress call Push DSC/ENT to transmit the Individual call Transmitting DSC CallsTransmitting Individual call Transmitting Individual acknowledgement Indv ACK Push DSC/ENT to transmit the Group call Transmitting Group call Push DSC/ENT to transmit the All Ships call Transmitting All Ships call Push DSC/ENT to transmit the Position Request call Transmitting Position Request call Transmitting Position Report call Push DSC/ENT to transmit the Position Report call Transmitting Position Reply callTransmitting Position Report Reply call Receiving a Distress call Receiving DSC CallsReceiving a Distress acknowledgement Receiving an Individual call Receiving a Geographical Area call Receiving an All Ships callReceiving a Distress Relay call Receiving a Position Report call Receiving a Position Request callReceiving a Position Reply call Receiving a Position Report Reply call Distress message Received MessagesRotate Channel to select Distress, push DSC/ENT Rotate Channel to scroll the message Rotate Channel to select Other, push DSC/ENT Other messages Offset time DSC Set ModeRotate Channel to select Offset time, push DSC/ENT Push DSC/ENT to program and to exit the DSC menu Rotate Channel to select Mmsi Check, push DSC/ENT Mmsi code checkCheck the 9-digit Mmsi DSC self ID code Push DSC/ENT to exit the DSC menu Other Functions Push LO/DX IC SCR for 1 sec. to enter Intercom modeIntercom Operation FM-3000 caller Display Backlighting Microphone Lock Function Auto ACK items are not selectable when using FM-3010 Set ModeSet Mode Programming Scan mode Set Mode ItemsScan resume timer Weather alert DSC watch This item adjusts the contrast of the LCD in 8 stepsBeep tone Internal speaker Automatic acknowledgement Attenuation levelScrambler code Fuse Replacement Connections and MaintenanceCleaning Antenna Connections External Speaker Jack Antenna ConnectorNmea in Red/NMEA OUT White Jacks Mounting the Transceiver Using the supplied mounting bracket Attach the clamps on either side of the FM-3000 Using the optional FM-3040 Optional Unit Installation 53.0 ⁄32 Unit mm Dimensions145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄2 Problem Possible Cause Solution Troubleshooting Channel List † Low power only Radio license for boaters U.S.A. only Operating Rules Speciﬁcations SpeciﬁcationsGeneral Transmitter Panel Description PTT Switch PTT pgsFront and side keys Channel UP/DOWN Keys Y/Z CHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/C VOLUME/DIMMER KEY VOL DIMLO/DX IC SCR SQUELCH/MONITOR/LOCK KEY SQL Moni L Top keys Squelch Indicator p Volume Indicator pScan Indicator pgs 1DUAL/TRI Watch Indicator pgs 13.3 3 Weather channels Call channelChannel group A. channels Push Y/Z to select the desired channel Turn power on Set outputPush H/L to select the output power, if necessary Lock Functions Push Y/Z to adjust the backlight levelActivating the Lock function Activating the All key lock function RF Attenuator Function Monitor FunctionPush LO/DX to turn the RF Attenuator function on and OFF Push CH/WX DW U/I/C several Programming scramble codes Dualwatch/Tri-watch OperationPush Y/Z to select the desired channel LO/DX IC SCR to turn To stop the scan, push Scan TAG To cancel the tag channel setting, push Scan TAG for 1 secConvenient Clearing setting all tagged channels Beep tone Beep Entering Set modeTurn power OFF While pushing 16 9 , turn power on Available characters Intercom beep functionPush SQL to move to forward then push Y/Z to se Connection cable FM-3011 6 m 20 ft 13.17 FM-3010 supplied accessoriesAccessories included with the FM-3010 Qty Completed installation should look like this Installation Mm 3⁄32˝ R11 Mm 3⁄32 165 mm 61⁄2 149 mm 57⁄8