Furuno FM-3000 Set Mode Programming, Auto ACK items are not selectable when using FM-3010

7. Set Mode

7.1 Set Mode Programming

Set mode is used to change the conditions of the trans- ceiver’s functions: scan mode (Normal or Priority), scan re- sume timer, weather alert, Dualwatch/Tri-watch selection, DSC watch, transceiver’s beep tone (transceiver or FM- 3010), internal speaker, LCD contrast (transceiver or FM- 3010), RF attenuation level, scrambler code and automatic acknowledgement.

1.Available functions may differ depending on dealer set- ting.

2.The optional FM-3010 has it’s own settings for the beep tone and LCD contrast.

qTurn power OFF.

wWhile pushing [16] ( 9 ), turn power ON to enter Set mode. e After the display appears, release [16] ( 9 ).

r Push [16] ( 9 ) to select the desired item.

Or push [16] ( 9 ) on the FM-3010 to select the item when using an optional FM-3010.

t Rotate [CHANNEL] to select the desired condition of the item. Use [Y]/[Z] when using an optional FM-3010.

y Turn power OFF, then turn ON again to exit Set mode

•SET MODE CONSTRUCTION

Scan mode	Scan resume timer
Scan Mode	Scan Timer
	Push

Automatic acknowledgement

Weather alert	Dual/tri watch
WX Alert	DUAL/TRI

Push when using FM-3010

DSC Watch, Internal Speaker

DSC watch

DSC Watch

AUTO ACK

Scrambler code*

Scrambler Code

*Scrambeler code is available only when FM-3030 is installed.

Attenuation level

Attenuation

Level

and AUTO ACK items are not selectable when using FM-3010.

LCD contrast	Internal speaker
LCD	Internal
Contrast	Speaker

Beep tone

Beep

37