Furuno FM-3000 manual Entering Set mode, Turn power OFF While pushing 16 9 , turn power on

13. FM-3010 CONTROLLABLE MIC

13.14 Set Mode Programming

Set mode is used to change the condition of the transceiver’s functions and the microphone’s own functions:

Transceiver’s functions—

scan mode (Normal or Priority), scan resume timer, weather alert, Dualwatch/Tri-watch, DSC watch, transceiver’s beep tone, internal speaker (transceiver), LCD contrast (trans- ceiver), RF attenuation level, scrambler code and automatic acknowledgement.

Microphone’s own functions—

beep tone function (microphone) and LCD contrast (micro- phone).

In this section, instructions are for the microphone’s own func- tions only. Refer to pgs. 37–40 for the setting of the other functions. (Some functions cannot be selected from the FM- 3010.)

Entering Set mode

qTurn power OFF.

wWhile pushing [16] ( 9 ), turn power ON.

•After a beep emission, a Set mode item (in the channel comment in- dicator and the condition in the channel number readout) is displayed.

ePush [16] ( 9 ) to select the desired item, if necessary. r Push [Y]/[Z] to select the desired condition of the item. t Turn power OFF, then ON to exit Set mode.

•Beep tone “BEEP”

➥Push [Y] to turn ON, [Z] to turn OFF the beep output.

Push

•LCD contrast “LCD CONTRAST”

➥Push [Y]/[Z] to adjust to a suitable LCD contrast.

Push

61