Furuno FM-3000 Only qualified personal should work in- side the equipment, Standard Steerling

	For the installer
R WARNING	R WARNING

ELECTRICAL SHOCK HAZARD Do not open the equipment un- less totally familiar with electri- cal circuits and service manual.

Only qualified personal should work in- side the equipment.

Be sure that the power supply is compatible with the voltage rating of the equipment.

Connection of an incorrect power supply can cause fire or equipment damage. The voltage rating of the equipment ap- pears on the label above the power connector.

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

DO NOT install the equipment where normal operation of the vessel may be hindered or where it could cause bodily injury.

DO NOT cut the DC power cable between the DC plug and fuse holder. If an incorrect connection is made after cut- ting, the equipment may be damaged.

RCAUTION

Ground the equipment to pre- vent electrical shock and mutual interference.

Observe the following compass safe dis- tances to prevent interference to a magnetic compass:

	Standard	Steerling
	compass	compass
Transceiver	0.95 m	0.65 m

iv