Furuno FM-3000 manual Edit the digit of your latitude data by using Channel

5.DSC Operation

5.3 Position and Time Programming

A distress call should include the ship’s position and time. If no GPS is connected, your position and UTC (Universal Time Coordinated) time should be input manually. They are in- cluded automatically when a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is connected.

Note: This manual programming is not available when a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is connected.

qPush [DSC/ENT] to enter the DSC menu.

w“POS Input” is selected automatically, push [DSC/ENT].

Input POS

° .

-° .

Null˘[H/L]

eEdit the digit of your latitude data by using [CHANNEL].

•Push [CH/WX] or [SCAN] to move the cursor forward or back- ward, respectively.

•After editing latitude data, select “N”; North latitude or “S”; South latitude.

•Push [HI/LO] to clear the position data.

rEdit the digit of your longitude data by using [CHANNEL].

•Push [CH/WX] or [SCAN] for cursor movement.

•After editing longitude data, select “E”; East longitude or “W”; West longitude.

•Push [HI/LO] to clear the position data.

tPush [DSC/ENT] to set the position and advance to the time setting condition.

•Push [16] ( 9 ) or [LO/DX] to abandon the setting and exit the DSC menu.

Input time

UTC :

Null˘[H/L]

yEdit the digit of the current UTC time by using [CHAN- NEL].

•Push [CH/WX] or [SCAN] for cursor movement.

•Push [HI/LO] to clear the time data.

uPush [DSC/ENT] to set the time, and exit the DSC menu.

•Push [16] ( 9 ) or [LO/DX] to abandon the setting and exit the DSC menu.

15