Furuno manual Other Functions, Intercom Operation, FM-3000 caller

6. Other Functions

6.1 Intercom Operation

The optional Intercom function allows you to talk to the deck from the cabin. The optional FM-3010 CONTROLLABLE MIC is required for Intercom operation.

Connect an optional FM-3010 as described on pgs. 41, 64.

• Transmitting is impossible during Intercom operation.

• The received signal is muted during Intercom operation.

INT

INT

Intercom

TALK

FM-3000 (caller) FM-3010 (listener)

qPush [LO/DX] ( IC SCR ) for 1 sec. to enter Intercom mode.

•The FM-3010 power is automatically turned ON, even if the power is OFF.

rAfter releasing the PTT switch you can hear the through the speaker.

tTo return to the normal operation, push [LO/DX] ( momentarily.

response

IC SCR )

INT

INT

Intercom

FM-3000FM-3010

wPush and hold [LO/DX] ( IC SCR ) again to call up.

• The transceiver and microphone emit call beeps.

ePush and hold the PTT switch and speak at a normal voice level into the microphone.

•“TALK” or “LSTN” appears on the caller or listener function dis- play, respectively.

•To adjust the FM-3000’s speaker output level, rotate [VOL].

•To adjust the FM-3010’s speaker output level, push after [VOL] pushing [Y]/[Z].

•Other keys also turn the function OFF, however, the correspond- ing function is then activated (e.g. pushing [16] ( 9 ) selects Channel 16).

1.While in the Intercom mode, the transceiver functions (transmit and receive) are interrupted. If the transceiver is in transmit condition, the Intercom function is not avail- able.

2.When a DSC call is received, “DSC received” ap- pears and the last received DSC message is displayed after the Intercom use is finished.

3.When a WX alert is received, “WX ALT” blinks and a beep sounds. The WX alert sounds after the Intercom use is finished.

35