April 2004
4-42 Programming Site Data

Entering the Dig ital Output

While resembling the Analog Output option, the Digital Output
option enables you to set up parameters necessary for a digital
output. To enter the option, scroll to the Digital Output entry on
the Program Menu and press [ENTER]. The screen appears
similar to Figure 4-20 below. To step through each parameter,
press the [T] key. Refer to Figure A-7 on page A-7 of Appendix
A, Menu Maps.
Figure 4-20: The Digital Output Window
1. The first prompt enables you to select the output function
from five choices:
•Off
•Pulse Totalizer
•Frequency
•Test Points
•Gate Input
Digital Output
CancellOK
Function
Data Source
Units/Pulse
Polarity
Pulse Totalizer
Pulse Width
Low/High
1
0
µs
m3
Fwd Totalizer
Fwd m3