April 2004
4-34 Programming Site Data

Entering Analog Inputs

The Analog Inputs option enables you to specify parameters for
general purpose or standard volume inputs. To enter the Analog
Inputs option, scroll to the Analog Inputs entry on the Program
Menu and press [ENTER]. If you have not enabled the Standard
Volume Option (see page 4-18), the screen appears similar to
Figure 4-15 below . To step through each parameter, press the [T]
key. Refer to Figure A-6 on page A-6 of Append ix A, Menu
Maps.

Entering General-Purpose Analog Inputs

Figure 4-15: The Analog Inputs Option Window
1. The first prompt asks you to select whether the desired
function is off or general purpose.
a. Press [ENTER] to open the drop-down menu.
b. Scroll to the desired response.
c. Press [ENTER] to confirm your selection.
Note: If you select “Off,” you cannot select any other pr ompts in
this window.
Analog Input
CancellOK
Function
Units
Span
Label
Zero
100
General Purpose
0
Psia
Input A Input B