April 2004
4-48 Programming Site Data
Entering User Functions (cont.)
3. The next prompt asks for the Units Symbol.
a. Press [ENTER] to reopen the text creation window.
b. Repeat the procedure used for the Label (on the previous
page) to create the Units Symbol.
c. When you have completed the entry, press [F3] (OK) to
confirm the symbol, or [F2] (Cancel) to leave the window
without adding the symbol.
4. The next prompt asks you to select the number of decimal
places.
a. Press [ENTER] to open the drop-down menu.
b. Scroll to the desired number of decimal places, ranging
from 0 to 4.
c. Press [ENTER] to confirm the entry.
5. The final prompt asks for the function itself.
a. Press [ENTER] to open the function creation window,
which appears similar to Figure 4-23 on the next page.
b. Use the four arrow keys to scr oll to the desired function or
table, and pre ss [ENTER] to confirm each entry. Use the
numeric keys to enter numeric values. Press [F1] (Delete)
to remove any mistaken or unwanted symbols or numbers.
Note: Pressing [SEL] causes the screen to alternate between a
set of symbols and functions and a list of user functions.
Use both screens to create the desired function.