April 2004
4-50 Programming Site Data

Entering Correction Factors

The final option in the Program Menu, Correction Factors, allows
you to enter and modify three correction factors: Reynolds
Correction, Kinematic Viscosity and Calibration Factor. To enter
the Correction Factors option, scroll to the Correction Factors
entry on the Program Menu and press [ENTER]. The screen
appears similar to Figure 4-24 below. To step through each
parameter , press the [T] key. Refer to Figure A-7 on page A-7 of
Appendix A, Menu Maps.
Figure 4-24: Reynolds Correction Window

Entering Reynolds Correction

1. The first prompt asks if you want to en able the Reynolds
Correction factor, a number based on the Kinematic Viscosity
and flow rate of the gas.
a. Use the [W ] and [X] keys to scroll to the appropriate
radio button.
Reynolds Correction
Inputs
Correction Factors
CancellOK
Calibration Factor
Re Correction On Off
K/V x 10-6 m2/s
Data Source
K/V Factors Single Table
Edit Table
10