Programming Site Data 4-3
April 2004
Entering Transducer Parameters
To enter the Transducer option, scroll to the Transducer entry on
the Program Menu and press [ENTER]. The screen appears
similar to Figure 4-2 below. To step through each parameter (or
reach a particular parameter), press the [T] key. Refer to
Figure A-3 on page A-3 of Appendix A, Menu Maps
Note: Refer to Chapter 3 for additional information about
clamp-on gas transducers and fixture configurations.
.
Figure 4-2: The Transducer Option Window
1. The first prompt asks you to select whether you are using a
wetted or a clamp-on transducer.
a. Use the [W] and [X] keys to scroll between the two types.
b. Press [ENTER] or [SEL] to confirm the choice.
IMPORTANT: While wetted transducers are listed as a choice,
the PT878GC is designed for use with Shear
wave clamp-on transducers. Consult GE
Panametrics befor e selecting wetted transducers.
Transducer Pipe Lining Path
Transducer/Pipe
OK
Cancel
Fluid
Type: Wetted Clamp-on
Transducer Special
Frequency 2.00 Tw 14
MHz
Wedge Ang 50
°
Wedge Tmp 25
°C
Wedge SS 1219.2
m/s
µs