Programming Meter Settings 7-17
April 2004

Changing Communications Settings (cont.)

6. The next prompt asks you to select either one or two stop
bits.The default number is one. Use the [W ] and [X] keys to
scroll to the desired number, and press [ENTER].
7. The final prompt asks you to select either seven or eight data
bits. The default number is 8. Use the [W ] and [X] keys to
scroll to the desired number, and press [ENTER].
•To confirm the entries and return to Operate mode, press [F3]
(OK).
•To leave the window with out confirming the entries and return
to Operate mode, press [F2] (Cancel) or the [ESC] key.