April 2004
4-10 Programming Site Data
Entering Pipe Parameters (cont.)
If you select a material that has the Schedule option:
a. The prompt asks if you wish to app l y DIN (the DIN
schedule). Press [ENTER] to select (or deselect) the DIN
box. (If you do not select the DIN option, the prompt
moves to the OD text box, and you enter the parameters for
the Diameter alternative as discussed on the previous
page.)
Note: If you have selected English units in the Meter Menu (as
discussed on page 7-3), the schedules appear as ANSI.
b. Press the [W] key twice to move the prompt to the
Nominal pipe size drop-down menu. Press [ENTER] to
open the menu. Scroll to the desired pipe siz e, and press
[ENTER] to confirm your choice.
c. Press the [X] key to move the prompt to the Schedule
drop-down menu. Press [ENTER] to open the menu. Scroll
to the desired schedu le (5S, 10S, 40S or 80S), and press
[ENTER] to confirm the choice.
After entering either diameter or schedule settings, pressing the
[S] key returns the meter to the Pipe Material prompt.
•To confirm the entries and return to Operate mode, press [F3]
(OK).
•To leave the window with out confirming the entries and return
to Operate mode, press [F2] (Cancel) or the [ESC] key.
•To return to the Pipe tab and scroll to other wind ows, press the
[S] key.