GE PT878GC Stopping (Pausing) a Log, Restarting a Log, Ending a Log

Logging Data 8-15
April 2004
Stopping (Pausing) a Log
To stop a log that is currently pending or running,
1. First, select the log you wish to pause in the Log Manager
(shown in Figure 8-2 on page 8-4).
2. Then open the Log menu, scroll to the Pause option, and press
[ENTER].
The PT878GC returns to the Log Manager, which displays the
highlighted log with “Paused” in the State line.
Restarting a Log
To restart a paused log:
1. First, select the log you wish to restart in the Log Manager
(shown in Figure 8-2 on page 8-4).
2. Then open the Log menu, scroll to the Start option, and press
[ENTER].
The PT878GC returns to the Log Manager, which displays the
highlighted log with a status of “Pending ” or “Running.”
Ending a Log
To end a log:
1. First, select the log you wish to end in the Log Manager
(shown in Figure 8-2 on page 8-4).
2. Then open the Log menu, scroll to the End option, and press
[ENTER].
The PT878GC returns to the Log Manager, which displays the
highlighted log with a status of “Finished.” The space not used
by the finished log is freed for reuse.
Note: You cannot restart a finished log. You must create a new
log with the same parameters.