GE PT878GC Installing the Second Bracket (cont.), Installing the Transducers

April 2004
3-18
Installing the Second Bracket (cont.)
The spacing should now appear similar to that shown in Figure
3-21 below.
Figure 3-21: The Installed CFG-PI Fixture,
with Calculated Spacing
Installing the Transducers
1. Check to be sure the second CFG-PI holder bracket is
correctly positioned.
2. Apply a bead of CPL-16 couplant 6 mm (0.25 in.) wide on
each transducer face. (See Figure 3-22 below.)
Figure 3-22: Couplant on Transducer Face
S
S