Programming Site Data 4-7
April 2004

Entering Pipe Parameters

To enter the Pipe option, scroll to the Pipe entry on the Program
Menu and press [ENTER]. (From the T ransducer window , you can
scroll back up to the T ransducer tab and press the [X] arrow key
to reach the Pipe window and press [ENTER].) The screen
appears similar to Figure 4-3 below. To step through ea ch
parameter , press the [T] key . Refer to Figure A-4 on page A-4 of
Appendix A, Menu Maps.
Note: Refer to the brochure Sound Speeds and Pipe Size Data
(914-004) for additional informa tion about pipe sizes and
sound speeds.
Figure 4-3: The Pipe Option Window
Transducer Lining Path
Transducer/Pipe
5
Schedule

Cancell

OK
Pipe
Material Other
SndSpeed 600.3 m/s
OD, mm
Wa ll, mm
2
Nominal Schedule
Fluid
5
OD x PI, mm
15.708
ANSI