April 2004
9-42 Servicing the PT878GC
Resetting to Factory Default Parameters
For various reasons, you might wish to return the PT878GC to its
original settings. The Factory Defaults option enables you to
return the meter to its preprogrammed default settings. To enter
the option, scroll down to the Factory Defaults entry in the
Service Menu and press [ENTER]. The screen will appear similar
to Figure 9-26 below.
IMPORTANT: All sites and logs will be lost if you use the
Factory Defaults option. Be sure to transfer or
print all sites and logs before resetting!
Figure 9-26: The Factory Defaults Option
1. You have two options:
•Press [F2] (Cancel) to return to Operate Mode without
changing the current settings.
•Press [F3] (OK) to confirm that you wish to restore the
factory default settings.
2. The program asks for confirmation: “Are you SURE?” Repeat
the procedure shown in step 1 above.
The PT878GC replaces the default site file and the global meter
settings with the factory default settings.
Factory Defaults
Cancel OK
*** WARNING ***
You will LOS E all ch an ge s by
pressing OK.
Choose CAN CEL to exit or OK to
proceed.