Logging Data 8-5
April 2004

Setting up a New Log

The New Log option enables you to create and set up parameters
for a new log. You can access this option in two ways:
•by scrolling to the New Log option in the Logging Menu (as
shown in Figure 8-1 on page 8-2) and pressing [ENTER], or
•by scrolling to the New option in the File menu of the Log
Manager (as shown in Figure 8-3 on page 8-4) and pressing
[ENTER].
In either case, the Create New Log screen appears similar to
Figure 8-4 below. Use the four arrow keys to scroll to the desired
letter or number, and press [ENTER]. Repeat this procedure until
you have created the desired log name with up to eight characters.
(Press [F1], Delete, to remove any unwanted letters or numbers.)
When you have finished, press [F3], OK, to confirm the entry.
Figure 8-4: The New Log Window
The PT878GC now asks for log formatting and measurements.
The screen appears similar to Figure 8-5 on the next page.
6 7 8 9
Delete Cancel OK
A B C D E F G H
I J K L M N O P
Q R S T U V W X
Y Z 0 1 2 3 4 5
Create New Log