Servicing the PT878GC 9-27
April 2004

Setting up Signal Parameters (cont.)

5. The next prompt asks for velocity aver ag ing, the number of
velocity measurements to average together to smooth out
noise in the system.
a. Press [ENTER] to open the drop-down list.
b. Use the [T] or [S] arrow keys to scroll to the desired
number.
c. Press [ENTER] to confirm your selection.
6. The final prompt, errors allowed, specifies the number of
errors the meter can record before displaying an error
message.
a. Press [ENTER] to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm your entry.
You have finished entering data in the Signal Parameter window.
To leave this window,
•Press the [T] key to return to the Signal Parameter tab, and
the [X] arrow key to move to the Measurement Mode tab.
•Press [F2] (Cancel) to return to Operate Mode without
confirming the changes.
•Press [F3] (OK) to confirm the new data and return to Operate
Mode.