Installation

2

Fuses

You received the liquid handler without any fuses installed. To install the fuses:

1Locate the accessory package containing the fuse drawer appropriate for your line voltage. Discard the other fuse drawer.

2Locate the accessory package containing the

5.0A “T” Slo-Blo fuse (5 x 20 mm size) fuses.

Fuse installation for 100/120 voltage

3Install the fuse(s) into the fuse drawer. The fuse drawer for 100/120V accepts one fuse. The fuse drawer for 220/240V accepts two fuses.

4Insert the fuse drawer into its receptacle in the liquid handler. See rear panel diagram on page 2-16.

Fuse installation for 220/240 voltage

Electrical Connections

2-23

Page 39
Image 39
Gilson 215 manual Installation Fuses