Gilson 215 manual Configuring the Liquid Handler

Operation

Configuring the Liquid Handler

The liquid handler comes from the factory with its configuration set by Gilson. Configuration information is stored in the non-volatile memory of the liquid handler. Prior to using the liquid handler for the first time, it is important to review and adjust the default configuration to make sure it is correct for your application.

The following pages describe how to use 215 Setup Utility to configure the liquid handler. This information is also available in the on-line help supplied with the program.

When you execute the 215 Setup Utility from the computer, the following tabs appear:

•about

•pump type

•syringe options

•rinse site

•liquid detector

•adjust XY

•Z height

•home phase

•safety contact

•bearing life

•sound & display

•emergency contact

Following is a description of each of the tabs.

3

ConfiguringtheLiquidHandler

3-5