Portable Dryer Troubleshooting | Safety |
Dryer Safety
Instructions and
Information
Thank you for choosing an GSI Grain Dryer. It is designed to pro- vide excellent performance and ser- vice for many years.
This manual refers to the trouble- shooting of the E.M.C.S.and Series 2000 Competitor models. Different models are available for liquid pro- pane or natural gas fuel supply, with either single phase 230 volt, or three phase 230, 460, 575 volt electrical power. (Also 380 volt 50Hz).
The GSI Group Inc. recommends contacting your local power com- pany, and having a representative survey your installation so the wir- ing is compatible with your system and adequate power is supplied.
The principal concern of the GSI Group, Inc. ("GSI") is your safety and the safety of others associated with grain handling equipment. This manual is written to help you un- derstand safe operating proce- dures, and some of the problems that may be encountered by the op- erator or other personnel.
As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions exist, and to inform all personnel associated with the equipment, or who are in the dryer area. Avoid any alterations to the equipment. Such alterations may produce a very dangerous situation, where serious injury or death may occur.
WARNING! BE ALERT!
Personnel operating or working around electric fans should read this manual. This manual must be delivered with the equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the equipment.
Safety Alert Symbol
The symbol shown is used to call your attention to instructions concerning your personal safety. Watch for this symbol; it points out important safety precau- tions. It means "ATTENTION", "WARNING", "CAUTION", and "DAN- GER". Read the message and be cau- tious to the possibility of personal in- jury or death.
3
