GSI Outdoors PNEG-630 manual On-Board Diagnostics, LED Indication Fault Mode

Wiring Reference Portable Dryer Troubleshooting

Fenwal Board Troubleshooting

On-Board Diagnostics

The LED will flash on for 0.2 seconds then off for 0.2 seconds to indicate an error condition.

The pause time between error codes will be 2.5 to 3.0 seconds. During power-up, the LED will light for one second and then turn off to indicate normal operation.

LED Indication	Fault Mode
Steady on	Internal Control Failure
2 Flashes	Flame Fault**
3 Flashes	Ignition Lockout Fault

**May indicate either that a flame was detected during pre- or post-purge, or that there is a flame sensing error.

If a lockout occurs, the board will have to be reset

by shutting off the power to the board.

Measure Flame Current

Flame

S1 Test

+

-

Flame S1 Test

FC+

FC-

Micro Amp Meter

BURNER	BURNER	BURNER
YES	NO	NO

40