Safety Precautions

Please read this entire manual before unpacking, setting up, or operating this instrument.

Pay particular attention to all danger and caution statements. Failure to do so could result in serious injury to the operator or damage to the equipment.

To ensure the protection provided by this equipment is not impaired, do not use or install this equipment in any manner other than that which is specified in this manual.

Use of Hazard Information

If multiple hazards exist, this manual will use the signal word (Danger, Caution, Note) corresponding to the greatest hazard.

DANGER

Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation that may result in minor or moderate injury.

NOTE

Information that requires special emphasis.

Precautionary Labels

Read all labels and tags attached to the instrument. Personal injury or damage to the instrument could occur if not observed.

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.

This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical shock and/or electrocution exists and indicates that only individuals qualified to work with hazardous voltages should open the enclosure or remove the barrier.

This symbol, when noted on the product, identifies the location of a fuse or current limiting device.

This symbol, when noted on the product, indicates that the marked item can be hot and should not be touched without care.

This symbol, when noted on the product, indicates the presence of devices sensitive to Electro-static Discharge and indicates that care must be taken to prevent damage to them.

This symbol, when noted on the product, identifies a risk of chemical harm and indicates that only individuals qualified and trained to work with chemicals should handle chemicals or perform maintenance on chemical delivery systems associated with the equipment.

This symbol, if noted on the product, indicates the need for protective eye wear.

This symbol, when noted on the product, identifies the location of the connection for Protective Earth (ground).

 

Page 7

8990saf.fm

Safety Precautions

Page 9
Image 9
Hach 900 MAX manual Safety Precautions

900 MAX specifications

The Hach 900 MAX is an advanced analytical instrument designed to perform water quality analysis with precision and efficiency. This multiparameter water quality analyzer is tailored for a wide range of applications, including environmental monitoring, wastewater treatment, and industrial processes. Its unique design and technology make it a valuable tool for professionals in the field.

One of the standout features of the Hach 900 MAX is its ability to measure multiple parameters simultaneously. Equipped with advanced sensors, the device can analyze key water quality indicators such as pH, turbidity, dissolved oxygen, conductivity, and various chemical parameters. This comprehensive measurement capability allows users to gain a complete understanding of water quality in a single run, saving both time and resources.

The Hach 900 MAX utilizes cutting-edge technologies to provide accurate and reliable results. Its integrated optical sensors employ advanced photometry, which enhances the detection of chemicals in water samples with high sensitivity. Additionally, the device includes advanced calibration management tools that ensure consistent accuracy over time. Users can easily perform routine calibrations with minimal effort, facilitating reliable data collection.

Another notable characteristic of the Hach 900 MAX is its user-friendly interface. The instrument features a large, touchscreen display that allows for intuitive navigation through various settings and parameters. Users can quickly access real-time data, generate reports, and analyze trends using the built-in software. The ability to customize dashboards and create visual representations of data enhances user experience and simplifies the decision-making process.

In addition to its analytical capabilities, the Hach 900 MAX emphasizes connectivity and data management. The instrument can be connected to laboratory information management systems (LIMS) and other data networks, enabling smooth data transfer and integration into existing workflows. This connectivity enhances collaboration among team members and facilitates compliance with regulatory requirements.

Durability is another hallmark of the Hach 900 MAX. The device is designed for use in demanding environments, with robust construction and protection against dust and moisture. This reliability ensures that the analyzer remains operational even in challenging conditions, making it suitable for field applications.

Overall, the Hach 900 MAX stands out as a powerful and versatile tool in the realm of water quality analysis. With its multiparameter measurement capabilities, advanced sensor technologies, user-friendly interface, and reliable performance, it enables professionals to obtain accurate insights into water quality efficiently. As environmental concerns continue to grow, instruments like the Hach 900 MAX play a crucial role in ensuring the safety and sustainability of water resources.