Conducting a HotSync operation via modem

You can use a modem, such as the Springboard™ modem accessory, to synchronize your handheld when you are away from your computer.

Note: The first HotSync operation must be local, using the cradle. After that, you can perform a modem HotSync operation.

To perform a HotSync operation via modem you must complete the following steps:

Connect a modem to your computer

Configure the Palm Desktop software for use with your modem

Connect a modem to your handheld

Configure the Modem Preferences on your handheld for use with your modem

Preparing your computer

There are a few steps you must perform to prepare your computer for a modem HotSync operation. Be sure to perform these steps before you leave your office so that your computer is ready to receive a call from your handheld.

To prepare your computer for a modem HotSync operation:

1.Confirm that the computer modem is connected and turned on, and that no communications applications, such as fax or telephony software, are running on a COM port.

Note: Make sure the computer is disconnected from all online services, such as America Online (AOL) and CompuServe. This helps to avoid conflicts with the COM port.

2.Start HotSync Manager if it is not already running, and from the HotSync Manager menu, choose Modem.

3.Adjust the following options as needed.

Page 182

Advanced HotSync® Operations

Page 190
Image 190
Handspring Visor manual Conducting a HotSync operation via modem, Preparing your computer