Page 22 Introduction to Your Visor Handheld
Import and export data, so you can easily transfer data from other
desktop applications into any of your main applic ations. See
“Importing data” in Chapter 2 for more information.
Print your Date Book, Address Book, To Do List, and Memo Pad
information on any printer.
Connecting the cradle
The cradle that comes with your Visor handheld enables you to
synchronize the information on your Visor hand held with the Palm
Desktop software using HotSync technology.
Note: If your computer does not have a USB port, or it uses
Windows 95, Windows NT, or MacOS 8.0 or earlier, you need
a serial cradle to connect to your computer. You can purchase
a serial cradle from http://www.handspring.com.
To connect the cradle:
1. Plug the cable from the Visor handheld cra dle into the USB port or
serial port on your co mputer.
Note: If you are unsure about the exa ct location of the USB port or
serial port on your computer, refer to the manual supplied
with the computer.

Installing Palm Desktop software

The following instructions guide you through installing Pa lm
Desktop software. After installation, refer to the online Help in Palm
Desktop software for in formation about how to use the software.
Note: You must install the software that comes with your Visor
handheld even if you already installed Palm Desktop software
for a previous Palm organizer.
Shown with
USB port