Storage (over 30 days)
At the end of each year, prepare the unit for stor- age as follows.
1.Drain the fuel from the carburettor and the fuel tank. Change the engine oil. See the en- gine manufacturer’s instructions.
2.Clean the entyre unit.
3.Charge the battery.
GB
How To Order Replacement Parts
The replacement parts are shown either on the back pages of this Instruction Book or in a sep- arate Parts List Book.
Use only manufacturer’s authorized or approved replacement parts. The letter placed on the end of the part number denotes the type of finish for the part, C for chrome, Z for zinc, a PA for pur- chased assembly. It is important that you include this when ordering a part. Do not use attach- ments or accessories not specifically recom- mended for this unit. In order to obtain proper replacement parts you must supply the model number of your mower (see nameplate).
Replacement parts, except for the engine, trans- mission, transaxle or differential, are available from the store where the mower was purchased or a service shop recommended by the store.
If you are unable to obtain parts or service in the manner outlined above, then contact:
HAYTER LIMITED,
Service Department,
Spellbrook,
Bishop’s Stortford,
Hertfordshire. CM23 4BU.
MURRAY, INC. International Sales P.O. Box 268
Brentwood, Tennessee USA 37024
Fax (615)
Replacement parts for the engine, transaxle, or transmission, are available from the manufac- turer’s authorized service centre found in the commercial pages of the telephone directory. Also, see the individual engine or transmission warranties to order replacement parts.
When ordering the following information is re- quired:
(1)The Model Number
(2)Serial Number
(3)Part Number
(4)Quantity
12 |
