E. Mesh Fronts
WARNING! Risk of Burns! A decorative front is required for this model. DO NOT operate this appliance without a decorative front in place.
Only doors certified for use with this appliance model may be used. Contact your dealer for a list of doors that may be used.
A mesh front is included with the RED40 and RED40ST.
To attach the mesh front to the appliance, use the two mesh brackets. These brackets are mounted to the un- derside of the top of the appliance viewing area and are fastened to the appliance by two screws on each bracket. See Figure 13.11. There are two hanging tabs on the back of the mesh front assembly that are bent upward. Engage these tabs in the slot of the brackets.
MESH BRACKETS |
MESH FRAME |
ASSEMBLY |
HANGING TABS |
MESH FRAME ASSEMBLY |
Figure 13.11. Mesh Front Installation.
58 | Heat & Glo • RED40, RED40ST • |