![](/images/new-backgrounds/1027292/272923x1.webp)
PLEASE READ THIS MANUAL BEFORE INSTALLING
AND USING THIS APPLIANCE.
MODELS: XLR-N-AU, XLR-PB-AU
ARE SAI GLOBAL APPROVED FOR NATURAL GAS, PROPANE OR BUTANE AS A BALANCED FLUE HEATER.
Refer to the appliance data plates for gas consumptions and pressures.
Installation of this appliance should only be carried out by an authorized person in ac- cordance with the manufacturer's instruc- tions. Appliance is to be installed in full compliance with the National Gas Installa- tion Standard AS5601, the manufacturer's instructions, and any local authorities' re- quirements for gas, electrical and building regulations.
This appliance and its components are tested and safe when installed in accor- dance with this Installation Manual. Report to your dealer any parts damaged in ship- ment, specifically check glass condition. The gas logs and flue system components are in separate packages. Read all in- structions before starting installation and follow these instructions carefully during
installation to ensure maximum benefit and safety. Failure to follow them will void your warranty and may present a fire hazard.
The Heat & Glo, a brand of Hearth & Home Technologies Inc. warranty will be voided by, and Heat & Glo, a brand of Hearth & Home Technologies Inc. disclaims any re- sponsibility for the following actions:
•Installation of any damaged heater or flue system component
•Modification of the heater or balanced flue system installation other than as instructed by Heat & Glo, a brand of Hearth & Home Technologies Inc.
•Improper positioning of the gas logs or the glass door
•Installation and/or use of any component part not manufactured or approved by Heat & Glo, brand of Hearth & Home Technologies Inc., not withstanding any independent testing laboratory or other party approval of such component part or accessory.
It is the responsibility of the professionals involved with the service and installation of the appliance to test the operation of the appliance before leaving the installation site.
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these installation instructions may result in a possible fire hazard and will void the warranty. Save this manual for future reference.
Heat & Glo, a brand of Hearth & Home Technologies, Inc. 7571 215th Street West, Lakeville, MN 55044 Copyright 2011 • Printed in U.S.A.
2 | Heat & Glo • |