D. Electrical Service and Repair
WARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.
WARNING! Risk of Shock! Replace damaged wire with type 105 °C rated wire. Wire must have high temperature insulation.
E. Junction Cord Information
The junction cord is installed at the factory. refer to figure 12.2. for more information.
Note: There is an alternative access to the junction cord. This can be accessed by removing the valve assembly. See Figures 11.1 and 11.2.
Figure 12.2. Junction Cord Information |
Heat & Glo • | 45 |
