3-13. OPERATING INSTRUC-
TIONS FOR OPTIONAL DIRECT-CONNECT SHORTENING SYSTEM
Model 500/600
1.Connect the female quick disconnect, that is attached to the hose in the rear of the fryer, to the correct male quick disconnect at the wall. Once attached, the hose can remain connected unless the fryer is moved. Figure 1.
In order for the system to work properly, attach the hose to the shortening return line only.
2.Open the drain valve and drop the shortening from the frypot, into the drain pan.
Figure 1
3.Once all shortening is gone from frypot, turn the red handle counterclockwise, into the down position and hold. Figure 2.
4.While holding the handle down, turn the COOK/PUMP switch to the PUMP position. Shortening is now pumped from the drain pan.
Figure 2
5.Once all the shortening is out of the drain pan, turn the COOK/PUMP switch to the OFF position.
6.Turn red handle back to original position.
7.Frypot is now ready for fresh shortening.
1207 |
