Hitachi DZ-BD10HA Selecting a recording mode, White balance mode, During recording pause, press

Various Recording Techniques

Sand&Snow

Prevents underexposure of the subject in very bright conditions, such as at the beach or on a ski slope.

Low Light

Allows you to record in dark places with limited light.

Selecting a recording mode

1During recording pause, press

MENU.

Select “Camera Functions

2Setup” “Program AE” a recording mode

Press the confirmation button to confirm, then MENU to end.

The selected recording mode

3(other than Auto) appears in the LCD monitor (p.31).

•The recording mode is retained in memory even when the power is turned off.

Note

When recording in dark places, after- images may appear if the subject is moving or if camera shake occurs. Use a tripod for best results.

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD

Adjusting the Color (White Balance)

Light is required when recording subjects. While the naked eye perceives colors as they are, images recorded by a camera may appear redder or bluer than they actually are. To record white colored subjects as white images, adjust the white balance.

The camcorder normally adjusts the color automatically (during Auto). Change the white balance setting according to the recording conditions.

White balance mode

Auto (No icon appears.)

Set

You can manually adjust white balance to match the light source or situation.

Outdoors

To record in fine weather.

Indoor 1

To record under incandescent light, halogen light or soft fluorescent light.

Indoor 2

To record under bright fluorescent light

48