Self-Timer(p.55) (when using Card)

No icon: Off

: On

(Ten-second countdown)

Flash (p.52) (when using Card)

No icon: Auto

: Flash On

 

: Flash Off

MIC. Filter (when recording Movies) (p.51)

No icon: Off

: On

HDMI audio output (p.73)

In case of the HDMI connection, audio signals are output only while playback.

No icon: Audio signals are output. : No audio signals are output.

Remaining battery level (p.25)

Full

 

Almost empty

 

 

 

 

Recording status

REC : Recording

:Recording pause (lit green) /Focus is locked (lit purple when using Card (recording stills))

No icon*2

Remaining space on HDD/BD/DVD/Card*3

REM XX HOUR XX MIN*4

:Remaining recordable time during movie recording

REM XX*5

:Number of remaining recordable still images during stills recording

*1 No icon appears when:

no disc or card is inserted.

an unusable disc or card is inserted.

*2 No icon appears when:

no disc or card is inserted.

a disc not formatted is loaded.

a protected disc or locked card is loaded.

the HDD, disc, or card has no remaining space.

*3 No remaining time or number will be displayed when a protected disc or locked card, or a finalized BD-RE/BD-R/DVD-RW (VF mode)/DVD-R disc is inserted.

*4 Recording times are estimates and will change depending on recording conditions.

*5 The number of recordable stills is approximate. Depending on the recording conditions, the number may not decrease.

„Efficient use of the

battery pack

Be sure to turn Quick Start On (p.42). Quick Start is set to “On” by default.

Closing the LCD monitor while powered on during recording pause

The media indicator (HDD/BD/ DVD/SD CARD) flashes and the camcorder enters sleep mode.

Opening the LCD monitor

Recording pause is restored quickly in about one second and the media indicator lights.

The camcorder does not enter sleep mode when:

The camcorder is recording a scene.

There is no disc or card in the camcorder.

The HDD, disc or card does not have sufficient remaining free space.

An unusable disc or card is inserted.

The recording settings are reset to default when recording pause is restored.

Regardless of the power save setting (p.42), the camcorder power will be automatically turned off if standby in sleep mode continues for approx. 30 minutes. In this case, turn the power switch to “OFF” first, and then back to “ON”.

The lens cover automatically closes when the camcorder enters sleep mode.

Recording

33

Page 33
Image 33
Hitachi DZ-BD10HA instruction manual „ Efficient use Battery pack, Opening the LCD monitor