Hitachi DZ-BD10HA Selecting a white balance mode, „ Setting the white Balance manually Set

Selecting a white balance mode

1During recording pause, press

MENU.

Select “Camera Functions

2Setup” “White Balance” a white balance mode

Press the confirmation button to confirm, then MENU to end.

The selected white balance mode

3(other than Auto) will appear in the LCD monitor (p.31).

•The white balance mode is retained in memory even when the power is turned off.

Note

Do not block the infrared sensor with your hand or other things to obtain a good cast for your recording.

Infrared sensor

„Setting the white

balance manually (Set)

Prepare a white object such a thick sheet of white paper that is not translucent.

Point the camcorder at the white object so that it fills the screen.

Thick white paper

1

2During recording pause, press

MENU.

Select “Camera Functions

3Setup” “White Balance” “Set”

4Press the confirmation button.

“” flashes in the LCD monitor.

Press the confirmation button again, and continue holding the

5button down until “” stops flashing and lights steadily.

The white balance setting is complete.

Press C to end, or to redo, repeat step 5.

•The white balance setting selected in “Set” is retained in memory until the setting is changed again.

•In order to accurately adjust the

6color, readjust the settings in “Set” each time the recording conditions change.

If the power is turned off while white balance is in “Set” mode, “” flashes in the LCD monitor the next time the power is turned on to remind you.

Various Recording Techniques

49