„ Viewing on your TV | Hitachi DZ-BD10HA manual

Viewing on your TV

Turn on the TV and switch the TV input to the terminal where the camcorder is connected.

Turn on the camcorder.

The image shown in the camcorder’s LCD monitor appears on the TV screen, allowing you to view playback, recording, and editing on the large screen of your TV.

•If the camcorder is connected to a TV through the HDMI OUT terminal and another image terminal at the same time, the image is output only through the HDMI OUT terminal.

•If the camcorder’s COMPONENT terminal and A/V OUT terminal are connected to a TV at the same time, the image will be output from the COMPONENT terminal only.

Hints

•Volume can be adjusted on your TV.

•When operating the camcorder while viewing your TV screen, using the supplied remote control is convenient. However, if you are using other Hitachi-brand A/V devices, they may be operated by the camcorder’s remote control.

Notes

•If you have a wide-screen TV (screen ratio 16:9), and the TV is set to wide mode, the disc navigation screen may not fit within the TV screen. In this case, change your TV’s wide mode setting. (Refer to your TV’s operation manual.)

•Do not leave the camcorder’s menu screen and disc navigation screen displayed on your TV screen for too long. Doing so may cause damage (ghosting) on your TV screen.

75	Viewing on the Other Devices

Image 75

Hitachi DZ-BD10HA instruction manual „ Viewing on your TV, Volume can be adjusted on your TV

Contents

English DZ-BD10HA Identifications of caution marks Important Information Sdhc logo is a trademark. SD logo is a trademark Important Safety Instructions Table of Contents Dubbing on BD/DVD/Card Cable AV Cable View on LCD monitor This camcorder makes all of the following possibleStills Movies Card HDD/Card „ Choosing a disc to suit your purpose YES no VF mode One-time recording Card capacity required for recording About media descriptions Recording surface Before Using the Product Be sure to read this informationHow to hold a disc For correct recording Conduct test recording Using BD/DVD with other equipment Hitachi will not compensate for recorded imagesCopyright Checking Provided Accessories IntroductionAbout Hdmi cable Names of Parts Power switch side Cooling fan outlet Display button p.31, 37 Guide button p.7Lens hood Stereo microphone Do not block the microphone with your hand during recording Tighten the Velcro strap Remote controlAdjusting the hand strap Release the Velcro strap How to Open and Use the LCD Monitor „ How to change the LCD brightnessYou can use the LCD monitor as follows Terminal at bottom „ Setting up the battery packCharge status of the battery pack Charge indicator „ Turning on the power Turn on the power Open the LCD monitor „ Changing the display language „ Setting the date and time Function „ About HDD/BD/DVD Unusable Discs „ About cards„ Cautions for discs and cards When a new BD-RE, BD-R, or DVD-RW is inserted, see p.24 Close the lid before setting the disc securely into place„ Inserting a BD or DVD Open the LCD monitor „ When loading a new BD-RE/BD-R/DVD-RWWhen using a DVD-RW Removing the disc „ Connecting the camcorder to a wall outlet Battery Pack „ Charge lamp status and charging time AC Plug Adapter not supplied „ Efficient use of the battery When handling a disc Turn the power switch to Mode until HDD indicator lights Hint Press Photo „ When recording movies „ When recording stillsPress the record OFF Button Hints See the next page for details On-Screen Information Recording mode p.27 Opening the LCD monitor „ Efficient use Battery pack Press the confirmation button Press „ Choosing and playing back multiple scenes Position of currently Played back image „ Jumping to the designated sceneSelect the desired point by time by pressing f/ e / d / c All selected scenes SD memory card Movie/Stills „ Adjusting speaker volume during movie playbackWhen playing movies „ Information display during playback Movies During playback pause Movies During playback „ Playing still pictures on a card automatically Slide Show Still pictures During card playback „ Capturing a still picture from a movie Photo Capture „ Playing back scenes repeatedly Repeat PlayPress the confirmation button to begin playback Example How to Operate the Menu Menu items „ About the LCD setup and initial setupDefault See 1st level Setting Menu While Recording Setting the date and time Changing the date format„ About the demonstration function Recording at close range Setting the digital zoomMagnified Recording Optical Zoom Digital Zoom Recording at Close Range Macro Recording Conversion lens Adjusting the Focus Manually Manual FocusFocusing range Attaching the separately sold lenses Manual focus icon How to focus manuallyAdjusting Brightness Image Exposure Adjust the focus by pressing Exposure Bar Recording modeAdjust the exposure by pressing d/c Compensating for backlight During recording pause, press Selecting a recording modeWhite balance mode Select Camera Functions Setup Program AE a recording mode Infrared sensor Selecting a white balance mode„ Setting the white Balance manually Set Press C to end, or to redo, repeat step Turning OIS Off/On Using the OpticalUsing the Face Detection Setup OIS On/Off Face Detection is not available for recording on a DVD disc Select Camera Functions Setup Auxiliary Line On/OffDisplaying Recording Guidelines Auxiliary Line Turning the MIC. filter On/Off Select Camera Functions Setup MIC. Filter On/Off Default Full AutoUsing the Flash Flash mode Select Camera Functions Setup Flash a flash mode Selecting a flash modeTurning Off Recording Indicator Beneath the Lens Turning Off/On the recording indicator Changing the Movie Quality Switching Movie QualityTV Wide Mode Setting the Wide Mode Using the Self-Timer Select Record Functions Setup Self Timer OnMenu Before you begin Dubbing optionsDiscs and picture quality for dubbing Time required for dubbing With auto divide When the dubbing is not completed on one disc or cardHints for dubbing About the playlist p.63 for dubbing Turn the power switch to Mode until its indicator lights DubbingPress Dubbing Select Execute, then press Confirmation button When you select Date in stepSelect With auto divide or For BD or DVD only Press SELECT, then press Category SettingsTo set Category DisplayingonlyDubbedor Not Dubbed Scenes Category DVD Menu Items for the Disc Navigation „ Menu flows for the disc navigation When using HDD/BD-RE/DVD-RAM/DVD-RW VR mode/Card MoviesWhen using BD-R/DVD-RW VF Video mode/DVD-R When using a card Stills Select Scene Edit Playlist „ What is Playlist?„ Creating a new Playlist Create Playlist Press , then press Menu „ Adding scenes to a Playlist Edit Scene to be „ Deleting scenes from Playlist Edit„ Arranging the order of scenes in the Playlist Edit Scene you wish to delete by pressing d/ c „ Deleting a Playlist Delete Selected scene is played Combining Multiple Scenes Edit CombineDivision, press Select Locked scenes Stills on a card cannot be deleted p.69 Fade screen appears Adding Special Effects Edit FadeChoose more than one scene p.35 Display returns to the disc navigation screen Select Scene Lock Go ToLocking Scenes on a Card Lock Press , then Menu Press C to quit When using HDD/BD/DVD Card MoviesWhen using a card Stills To unlock the scene All movies and still pictures will be deleted from the card When using the HDD/BD DVD/Card MoviesFormatting the HDD Format Checking Remaining Recording Capacity Insert a disc you want to protectInformation of the chosen medium appears on the screen Connecting the camcorder to your TV’s Hdmi terminal „ Connecting to a TV Connecting the camcorder to your TV or video terminals Connecting the camcorder to your TV’s component input „ Viewing on your TV Volume can be adjusted on your TV Playing Back a DVD About DVD-RW VR Mode DiscsBefore finalizing a disc After finalizing a disc To power the camcorder p.25 Set the power switch to BD/ DVD PressMENU. , and then pressFinalizing a Disc Unfinalizing a Disc Select YES, then press the confirmation buttonFinalized BD/DVD About the software included PC requirementsOthers „ Software installation „ Connecting the camcorder to your PC Turn on the camcorder powerUSB terminal on the PC To USB Terminal Click Camcorder indications on the PCRemoving SD memory Card Confirm the device again Click OK Select Hitachi Bdcam HDDDrive name E, etc. will differ according to your PC Import images to the PC Click Play back the imported imagesChange the Library destination Create a creation list Set up the disc you are creatingClickConnecting toyour PC Insert a disc into the disc drive or a card slot „ Uninstalling Software Write to the mediaClickClick Precautions When Connecting to a PC Battery DZ-BP14SW Battery DZ-BP21SW Optional Accessories Message Cause & Troubleshooting Error Messages Message Cause & Troubleshooting Information Message Cause & Troubleshooting Message Cause & Troubleshooting Additional 25, 56 Additional Information Troubleshooting Power suppliesSymptom Cause and Correction During recording Camcorder to make repairs During playback 100 Additional Information 101 Disc Eject When the camcorder is connected to a PC BD-R/DVD-RW VF Miscellaneous 104 This camcorder is not intended for professional-use Save the data recorded on HDDDo not place this camcorder near a magnet or magnetic field Do not subject the camcorder to impacts No sand or dust Be careful of ambient temperatureDo not use a generally available 8 cm CD lens cleaner Do not point directly at the sun Handling HDD/Discs/Card CleaningCleaning the surface of the camcorder Using HDD/discs − Recording/Playback is not possible Disc CleaningStoring discs Momentary stop of playback image Menu System Reset Operating System License Information End User License Agreements for Operating System Software Major Specifications „ Movie Storage capacity of HDD/BD/DVD/Card 8GB Recordable time on DVDRecording quality Movie recordable time Recording media „StillsRecordable number of stills per card File size 1080i1125i/480i525i Glossary Additional Information 115 Insert/remove Index 117 Prohibition Guarantee and ImmunityLicense Agreement Grant of License To Order in the United States Hitachi WayTel Only Limited Warranty