Hitachi DZ-BD10HA Checking Remaining Recording Capacity, Insert a disc you want to protect

Editing

BD-RE RAM -RW (VR)

Protecting the BD/DVD

Although previously recorded movies will not be erased by recording new movies, a protect setting will ensure against accidental erasure and formatting. If the protect setting is activated, however, you will not be able to make new recordings until the protect setting is canceled.

1Insert a disc you want to protect

2Press , then press MENU. Select “Disc Setting” “Protect

3Disc”, then press the confirmation button.

The confirmation screen appears.

Select “Yes”, then press the confirmation button.

4• To cancel the protect setting, repeat the same steps to select “Unprotect Disc” in step 3.

Hint

To protect a card, lock its erasure prevention switch (p.22).

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD

Checking the

Remaining Recording

Capacity

1Insert the medium you want to check (except for the HDD).

2Press , then press MENU.

Select “HDD Setting”, “Disc Setting”, or “SD Card Setting”

3“Capacity”, then press the confirmation button.

The information of the chosen medium appears on the screen.

4After checking the information, press , or press C twice.

Hint

If you repeat recording/deleting images on a card for a long time, you may not be able to record scenes on it due to data fragmentation. In this case, dub or save your recordings on a disc or on your computer first and format the card.

72