Hitachi DZ-BD10HA Remote control, Adjusting the hand strap, Release the Velcro strap

Introduction

Remote control

REC PHOTO DISPLAY

MENU	DIGITAL	ZOOM
	ZOOM
SELECT
DELETE
DISC
NAVIGATION

PHOTO button (p.29)

REC button (p.27, 28, 29)

MENU button (p.20)

SELECT button (p.35)

d(reverse search) button (p.34, 38) DELETE button (p.66)

DISC NAVIGATION button (p.34)

* Provides the same functionality with .

DISPLAY button (p.31, 37) ZOOM T button (p.44) DIGITAL ZOOM button (p.44) ZOOM W button (p.44)

f (reverse skip) button (p.34, 38) c (forward search) button (p.34, 38) Confirmation button (p.34, 38)

C (stop/cancel) button (p.41)

e (forward skip) button (p.34, 38)

Inserting the supplied lithium battery into the remote control

While inserting a thin tipped	Insert the lithium	Slide the cover to
instrument (paperclip, etc.) into	battery with the	close it.
the hole marked PUSH, swing	positive (+) terminal
the battery holder arm out.	facing down.

Battery holder

Warning

BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT RECHARGE, DISASSEMBLE, OR DISPOSE OF IN FIRE.

Note

Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba CR2032, or Duracell DL2032. Use of another battery may present a risk of fire or explosion.

Adjusting the hand strap

Fasten the hand strap according to the procedure in the diagram.

Release the Velcro strap.

Loosen strap and insert your right hand from bottom.

Tighten the Velcro strap.

16