Hitachi DZ-BD10HA How to focus manually, Adjusting Brightness Image Exposure, Manual focus icon

How to focus manually

During recording pause or recording, press e (MF).

The Focus icon appears in the

LCD monitor.

Various	1
		Manual focus icon
Recording		• Focusing switches between
		Manual Focus and Auto Focus
		each time e is pressed. The
		icon is displayed only during
Techniques		manual focusing.
		• When the power is turned off,
	2
		Adjust the focus by pressing
		d/c.
		the camcorder returns to auto
		focus.

Hints

•To manually adjust the focus, always push the zoom lever toward the T (telephoto) side to magnify the subject. This prevents blurred images when you switch to wide-angle zooming.

•If you wish to adjust exposure while focusing manually, press f. The exposure bar lights in orange. To return to manual focusing, press e.

•Auto Focus may not perform well on subjects if: subjects are not in the center of the frame, both near and far subjects are within the auto focus bracket at the same time, subjects are moving rapidly, subjects are dark or low in contrast, etc.

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD

Adjusting the

Brightness of the

Image (Exposure)

Normally, the exposure is automatically adjusted. However, depending on the recording conditions, the exposure can be adjusted manually.

Adjusting the exposure manually

46