Hitachi DZ-BD10HA instruction manual Additional Information 101

Symptom		Cause and Correction	Reference
			page
Not displayed	BD, DVD-RAM, DVD-RW(VR mode), SD Card
normally in the disc	recorded on this camcorder and edited on another device
navigation screen.	may not be displayed normally in the disc navigation
	screen. In this event, use “Update control info.”.
	If too much time is required to display the HDD disc
	navigation screen, try the following.
	1 Press	, then press MENU.
	2 Select “Disc setting” or “HDD setting” or “Card
	setting” by pressing e/f, then press the
	confirmation button.		—
	The “Update control info.” confirmation screen
	appears.
	3 Select “YES” by pressing d, then press the
	confirmation button.
	Update of control information will begin. While
	“Updating...” is being displayed, a black screen may
	appear (and time may be required).
	(There are some BD/DVD/Card which cannot be used
	even by following the above procedures.)
The disc navigation	If the inserted card contains more than 3,999 still
screen does not show	pictures, only 3,999 stills can be shown in the disc
more than 3,999	navigation screen. However, it is possible to play back		—
stills from the	more than 3,999 pictures.
inserted card.
Photos on a card	This camcorder can play back image data recorded onto
cannot be played	memory card using other digital cameras conforming to
back.	DCF standards. However, depending on the recording
	condition of the image data taken by other digital
	cameras, blue thumbnails (see * of the illustration below)
	appear, and playback of these images may not be
	possible.

Fig. 1		—
	Disc Navigation
All Scenes		0025/0030
10/ 1/2008 10:10:10 AM
PLAY	SEL SELECT	EXIT

	*
It takes some time to	Stills with a large number of pixels will take more time to	—
play back photos.	appear.

Additional Information

101