Hitachi DZ-BD10HA „ Connecting to a TV, Connecting the camcorder to your TV’s Hdmi terminal

Viewing on the Other Devices

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD Use the GUIDE button for help! (p.7)

Connecting to Your TV

for Viewing

„Connecting to a TV

The connection method differs depending on the type of video input terminal that your TV is equipped with. Connection methods in order of best image quality are as follows: HDMI terminal – Component Terminal – Video terminal

Notes

•Before connecting, always turn down the volume of your TV set, to prevent feedback noise (howling) from your TV speakers.

•Insert the connector cables straight into the terminals. Inserting them at an angle may cause the terminals to break.

Connecting the camcorder to your TV’s HDMI terminal

The HDMI connection provides the highest quality digital image and sound signals to your TV through a single cable, without degradation.

HDMI

To HDMI OUT terminal

HDMI Mini-to-Standard Cable (sold separately)

Notes

•1080i signals are output from the camcorder’s HDMI OUT terminal. When the camcorder is connected to a TV which is not compliant with 1080i signals, the message “Playback error has occurred. Change the connection terminal.” appears in the camcorder’s LCD display. If the camcorder is recording or playing when this message is displayed, the operation stops. In this case, reconnect the cable through another method such as by using the component terminal. (See also “Troubleshooting” (p.97).)

•If the camcorder is connected to the TV through the HDMI terminal, audio will not be output from the camcorder other than during playback.

73 Viewing on the Other Devices