Hitachi DZ-BD10HA „ Jumping to the designated scene, All selected scenes, Cursor

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD

„Jumping to the designated scene

Press MENU after step of “Playing Recorded Movies/Stills” (p.34)— while a scene is played back.

The menu appears.

Select “Go To” by pressing f/e, then press c.

Select “Top”, “End”, or “Specify” by pressing f/e, then press the confirmation button to confirm.

Top: Goes to the beginning, then pauses playback.

End: Goes to the end, then pauses playback.

Specify: Goes to the specified point, then pauses playback. See followings on how to specify a point.

Viewing

Press the confirmation button.

zSpecifying the point to jump to

Select “Specify” in step , then press the confirmation button.

The specify screen will appear.

				Total recording time of
				all selected scenes
	Position of currently
1	played back image
			Go To
			CURRENT
			Go	To
			ENTER TOP			END RETURN
		Cursor			Cursor position

Select the desired point by time by pressing f/ e / d / c.

f: To select the beginning

e: To select the end

2d / c once:

To move the cursor one minute back or forward for HDD (ten seconds for BD/ DVD/Card, one still for card)

Press and hold d / c:

To move the cursor in ten minutes increments for HDD (one minute for BD/ DVD/Card, ten stills for Card)

Press the confirmation button.

The camcorder will go to the specified

3point and enter playback pause mode.

•To start playback, press the confirmation button again.

Hints

•To cancel the “Go To” procedure midway, press Cbefore going to the specified point.

•With a card, the number of stills will appear at the “Top”, “Current”, “End”, and “Go To” indicators.

Note

The cursor position is a rough estimate. The cursor may not move at even intervals.

36