Hitachi DZ-BD10HA instruction manual When the camcorder is connected to a PC, Disc Eject

When the camcorder is connected to a PC

	Symptom	Cause and Correction	Reference
			page
	No medium icon	The camcorder is not turned on. Check the power supply.	19
	appears on the PC.
		Turn the PC off and disconnect the USB cable. Then turn	—
		the PC back on and reconnect the cable.
	An error occurs	Playing back High Definition (HD) movies requires high
	while playing back	data processing power. Quit other applications and play
	movies recorded on	back again.	79
	the camcorder using
	the PC.
	The software does	Turn the PC and camcorder off, and try again.
	not run correctly on		—
	the PC.
	An error occurs	The temperature of the camcorder is too high due to
	during writing to a	continuous operation.
	disc.	Disconnect the camcorder from the PC, remove the disc	82
		from the camcorder, and then turn it off. After a few
		moments, connect them again and write to a brand-new
		disc.
	Transfer of images	Is the disc scratched or dirty?	108
	stops.	Clean the disc.
	An error appears	Make sure that your PC display adapter (video card)
	when starting	conforms to Direct X® 9.0c.
	ImageMixer 3		79
	AVCHD Edition for
Additional	HITACHI.
	The DISC EJECT	While the camcorder is connected to the PC, use Explorer
	switch does not work	to right-click the camcorder drive icon and select “Eject”.	82
	when the camcorder
	is connected to a PC.
Information
	When the time stamp	The file system of this camcorder is operated on
	of a file on a disc is	Greenwich Mean Time (GMT), and time lag information
	viewed on a PC, it is	has not been set. The time stamp of files viewed on	—
	different from the	Explorer looks different from the actual recording time.
	actual recording	The actual recording time will appear for the date/time
	time.	indication on the playback screen.
	It takes a long time	If you are editing a video file whose contents are different
	to save a video	from those of the project settings, it may take some time,	—
	edited.	since the entire video file must be re-encoded. Reconfirm
		the project settings.
	Unable to import	Before importing scenes from the disc, disconnect the
	scenes from BD-R/	camcorder from the PC and finalize it. Once finalized,	77
	DVD-RW/DVD-R.	you cannot add a scene (except DVD-RW (VR mode)).

102