Hitachi DZ-BD10HA Removing the disc, „ When loading a new BD-RE/BD-R/DVD-RW, Open the LCD monitor

Removing the disc

Pressing slightly on the center hub with a finger, grip the edge of the disc by your thumb and lift the disc out as shown.

„When loading a new BD-RE/BD-R/DVD-RW

When the disc is loaded, the format confirmation screen will appear in the LCD monitor. Format the disc according to the procedure below.

Let’s Get Started

Open the LCD monitor.

Note

Be careful that the power is not accidentally cut off during formatting. Otherwise, the disc will become unusable.

MENU

The	SELECT
confirmation
button

/ 

When the format confirmation screen appears, select “YES” by pressing d, then press the confirmation button.

When using a BD-RE/BD-R		When using a DVD-RW
Formatting will start. Skip step	.	Proceed to step	.

(When using a DVD-RW)

The recording format selection screen appears.

Select “VR Mode” or “VF Mode” by pressing d/c, then press the confirmation button.

VR Mode

After recording, you can perform various editing functions such as choosing and deleting scenes. You can play back the disc in a device which supports 8 cm DVD-RW (VR Mode) after finalizing the disc.

VF Mode (Video mode)

Although editing cannot be done on the camcorder, you can play back the disc on other DVD devices after finalizing the disc.

24