Holder 4.74 manual Operating the implements

C 4.74		Operating instructions
		Operating the implements
	ATTENTION	5	6

Turn on the starting safety switch (6) only at low engine speed.

-Set the rotary knob (5) to 0.

-Release the lock at the starting safety switch (6) and depress the switch. The indicator in the switch comes on.

ATTENTION

After the speed of the motor was raised, the oil flow may only be raised slowly.

Bild_C185

-Turn the rotary knob (5) for adjusting the oil flow from 0 to 100 litres/min until the performance of the imple- ment is reached.

NOTE

The implement coded plug specifies the maxi- mum oil flow for the related implement (for safety reasons).

The number 11 on the ring corresponds to the maxi- mum oil flow specified by the coding.

149 443 103