Holder 4.74 manual Adjusting the upper link, Equipment must not hit the cabin

C 4.74

Operating instructions

Operating the implements

Adjusting the upper link

The upper link can be secured at different holes. The re- quired height depends on your implement (for a better adap- tation of the equipment, to increase the lifting force and depending on the lifting height).

Upper hole

•More lifting power, lower lifting height. Lower hole

•Lower lifting power, higher lifting height.

ATTENTION

The equipment must not hit the cabin.

1Retaining clip

2Top link

3Top link pin

4Toggle

5Locking lever

-Secure the top link (2) with the pin (3) and secure the pin with the retaining clip (1).

-Adjust the top link (2) to the required length (by turning the toggle (4) to screw it in or out); secure the top link with the locking lever (5).

1 2 3

5 4 Bild_C268

ATTENTION

Both threads must be screwed in equally far.

149 443 83