Holder 4.74 manual BildC164

C 4.74

Operating instructions

Taking into operation

-Turn the ignition key to position 2.

The engine is being preheated. The preheating indica- tor (5) comes on.

NOTE

When starting at low temperatures, hold the ignition key longer (approx. 1 minute) in posi- tion 2.

-When the preheating indicator extinguishes, turn the ignition key to position 3 to start the engine.

The engine starts.

5	6	7	8			9	10
						15
				Motor	10	540U/min	20
						FRONT 1000U/min
					5		25
			1
					0	RPMx100	30
						PTO
			2	Km/h		electronic
						0000000 h

digital system

Bild_C164

ATTENTION

Operate the starter for a maximum of 20 sec- onds.Wait one minute before repeating the start- ing procedure.Repeatthestarting procedureonly twice at most.In case the engine does not start, carry out a troubleshooting according to the section entitled “Troubleshooting guide“.

-Release the ignition key after the start.

The battery charging indicator (7) and the engine oil pressure indicator (6) extinguish.

-Set the engine speed with the hand throttle button or accelerator pedal to the desired rpm (9).

-The hour meter (10) is activated.

149 443 57