Holder 4.74 manual Operation, Driving with hydrostatic drive and digital electronics

Operating instructions

Operation

C 4.74

Driving 1

Driving with hydrostatic drive and digital electronics

-Start the engine.

-Preselect the direction of travel with the direction switch (1).

-Pull up the forward/reverse selector switch (1) and move it to the front or rear (forward or reverse).

NOTE

After starting the engine, the forward/reverse selector switch must be operated once if it was in the forward or reverse position when starting. This prevents any accidental move- ment of the vehicle when starting the engine.

NOTE

You can also select the new direction when travelling at reduced speed.

CAUTION

The vehicle will brake strongly and acceler- ate in the opposite direction.

Bild_C165

60 149 443