Holder 4.74 manual Turning on the front PTO

Operating instructions

Operating the implements

Turning on the front PTO

DANGER

Before turning on the PTO, make sure no- one is standing close enough to the vehicle and the driven implement to be hurt.

ATTENTION

Check the mounting angle of the cardan shaft.

Do not start it under 1500 rpm.

-Release the lock at the starting safety switch (1) and depress the switch. The front PTO is turned on.

-To turn it off, depress the safety switch at the top.

NOTE

If the engine temperature is too high, the PTO will turn off automatically and an alarm will sound. The engine must cool at idle speed before being turned off. Restart the engine after checking for the cause.

DANGER

After the installed implement is turned off, it can continue to run. Wait until the implement is stationary before working on it again.

C 4.74

1

Bild_C182

98 149 443